Concrete
▼
Cement
▼
Aggregate
▼
Asphalt
▼
Soil-Field
▼
Soil-Lab
▼
General Lab
▼

Concrete
Cement
Asphalt
Moisture MetersConcrete moisture meters measure the moisture content instantly in concrete flooring and floor screeds. Meters provide a great non-destructive method to measure moisture in concrete. As well as providing repeatable reliable results.
Vapor Emission Test KitsThe vapor emission test kits determine the moisture acceptability for the placement of floor coverings. As well as coatings over concrete slabs.
Maturity TestingMaturity testing uses self-powered sensors to collect, store and upload time and temperature data. Sensors log data for maturity applications and temperature monitoring. Kits includes 50 four foot sensors, desktop COMMAND Center software, as well as any required accessories.
Lab CuringTesting equipment for all of your concrete lab curing needs such as: curing tanks, tank heaters and recording thermometers. As well as data loggers, digital psychrometers & more
ConsistencyConsistometers determines the consistency of stiff to extremely dry concrete mixtures. In addition the Kelly Ball finds the depth of penetration of metal weight into plastic concrete. Find all of your required consistency equipment here.
Measuring DevicesMeasuring devices for all of your concrete testing needs such as: digital calipers, planeness feeler gauge set and more.
Roller CompactedRoller compacted equipment and replacement accessories such as: Compaction hammer Tampers and Mold Assembly.
Concrete ThermometersConcrete thermometers ranging from dial face concrete thermometers to waterproof min-max thermometers. As well as chart recorders, USB data loggers, Bluetooth infrared and more.
Set Time PenetrometersSet Time Penetrometers test the rate of concrete mortar. In addition the Acme penetrometer determines the of concrete with slump greater than zero.
AggregateAggregate Testing Equipment Myers offers an extensive list of quality aggregate testing equipment that meet many industry standards. We have top of the line sieve and screen shakers along with brass steel sieves. The Test-Master® screen shaker features an easily controlled, integrated hopper for easier introduction of sample material. Other particle sizing equipment includes the universal and riffle sample splitters. Additionally, we provide all components for testing sand equivalency, including the sand equivalent stock solution. If durability and abrasion is what you are looking for, you will find it here. We have the Los Angeles Abrasion Machine that is used to determine the resistance to abrasion in crushed rock, slag, and crushed and uncrushed gravel. The Micro-Deval Apparatus tests abrasion resistance and durability of mineral aggregates. We also supply sulfate soundness equipment, which includes hydrometers, sieve holders, and washing buckets.
Sieve Shakers
General Lab
Marshall Compression MachinesThe Marshall compression machines measures resistance to plastic flow of bituminous paving mixtures. The machines have a motor with a reversing switch that produces uniform vertical 2″ movement per minute. The units include a calibrated load ring and dial indicator for determining test load. In addition, the load capacity is 10,000lbs and maximum piston travel is 3-1/2″.
Water BathsThe water baths have a microprocessor-based temperature control for precise temperature control throughout the range. Each unit includes a magnetic circulator, ensuring constant water temperature. As well as a stainless steel shelf, which stands 2″ above the bottom of each unit. Providing free circulation of water above and below test samples. The baths comes in a variety of different sizes and capacities for any laboratory testing need. The economy water bath holds eight standard 4″ stability molds. Its supporting shelf above the bottom allows water circulation around specimens. The automatic thermostatic control has a range of 150° to 500°F (65° to 160°C).
Core Drilling-SawingCore drilling-sawing equipment includes the core drill rig, saw package, and bits. As well as a clamp, retrieval tongs and the CoreSnap. The core clamp bolts onto the moving table of any masonry or block saw utilizing a 16″ blade. The unit has a powder coated finish and an adjustable opening that allows precise placement of the core. Core bits come in a variety of sizes ranging from 2″ to 12″ diameter and 14″ long. Custom sizes are also available upon request. The fast and easy to use patented core retrieval tongs remove cores from asphalt or concrete surfaces. The blade is inserted into space from core drill bit and grasps the core with its tongs. The CoreSnap provides removal of a drilled sample from a roadbed at or below the tackline without prying or drilling completely through the old roadbed.
Mix TestingMix testing equipment includes the quartermaster sampler splitter and a variety of heavy duty lab mixers. A splitter divides the larger asphalt mix samples required in Superpave specifications. The hopper accepts samples up to 120lb of any mix with aggregate between 9.5 to 37.5mm. In addition, it quarters the samples into four equal parts. In operation, a simple throw of a lever divides the sample. Using this device ensures greater control, consistency and uniformity in the preparation of test samples. The 5-gallon stationary mixer works well for sample batch mixing in either laboratory or field. A separate utility bucket cradles securely inside the enameled-steel mixer frame. The heavy duty portable asphalt mixers come equipped with 8″ wheels for maximum mobility. A direct drive motor helps generate more power for mixing. In addition, the heavy duty laboratory mixer has a 5qt capacity and a 1/6hp motor. As well as a selectable operating speeds of 139, 285 and 591rpm.
Distillation ApparatusA distillation apparatus determines the representative portion of residue in emulsified asphalts. In addition other apparatuses such as the Dean Stark determines the water content in petroleum products. Review each apparatus for your specific testing needs.
DuctilityA basic ductility machine has a three-speed machine designed for standard and force ductility tests. Select speeds of 1/4, 1 or 5cm per minute with the use of the lever shift. In addition other tests such as the temperature controlled ductility machine has a heating and cooling circulator. The machine measures the elongation of an asphalt binder specimen before failure. Review both ductility machines for your specific testing needs.
Flash Point TestersFlash point testers determine the flash and fire points with the Cleveland open-cup method. Testers come as electric or natural gas. As well as natural gas free standing operation testers. Review each flash point tester for your specific testing needs.
Particle ChargeA particle charge meter determines cationic emulsified asphalts. The meter provides selection of emulsified asphalts that are compatible with the available aggregate or sand. Also available, particle charge replacement plates.
SamplersBacon bomb samplers obtain samples from storage tanks, tank cars and drums when a sampler is lowered into the tank. Samplers come in plated brass and stainless steel, with dimensions of 2″ dia. x 10″L.
Softening Point ApparatusA softening point apparatus features a ring and ball method for softening point determinations. Apparatuses come in a variety of sets such as: the single softening point with a hot plate or a burner. As well as a double apparatus and a quad apparatus set.
SolubilityThe organic solvents set determines the degree of solubility in trichloroethylene of asphalt materials. Accessories available to go with the set: threaded coupling and glass fiber filters. As well as the Buchner funnel and a Gooch crucible.
Specialty OvensSpecialty ovens feature high-temperature ovens and performs safe, solvent-free cleaning. In addition the oven features a fully automatic method that saves time and creates a safer lab environment.
ViscosityViscosity tests feature viscometer bath and constant temperature baths. Both baths provide precise and constant temperature controlled baths. Other tests such as the cloud and pour point test viscosity. A cloud and pour point apparatus set tests the flow characteristics of petroleum oils. The apparatus uses the cloud and pour point method. Various parts and accessories also available, such as flasks, tubes, orifices, etc.
Pavement Quality TestingPavement quality testing equipment includes lab and field permeameters, the asphalt depth gauge, and highway straightedges. As well as asphalt sample boxes, the pavement quality indicator, and the benkelman beam. Asphalt permeameters test the permeability of a compacted asphalt paving mixture. A falling head method determines hydraulic conductivity of saturated 4″ or 6″ samples. The asphalt depth gauge makes accurate thickness determinations quickly and easily. Make depth measurements up to 11.75″ in 0.25″ increments from back of the paver. As well as curbside with no need to step directly on hot asphalt. The highway straightedge checks depressions in asphalt pavement. The pavement quality indicator produces fast, accurate and repeatable in-place density and temperature measurements of asphalt pavement. Instantaneous density and temperature readings help field personnel to establish more effective roller patterns. In addition it ensures pavement densities are within targeted range.
Soil-Field
Soil-Lab
PlatformPlatform Scales The NTEP approved platform scales have a 4″ x 4″ alloy steel platform. The easy to read backlit display reads in lb or kg. The scales also feature a bi-directional RS 232 interface. The scale functions include net/gross, pre-tare, animal hold, accumulation. The scales also have an external power adapter and internal calibration. In addition, the scales have a capacity of 5,000 or 10,000 lbs and a readability of 1 lb. The scales have an optional Intell-Weigh™ 10 indicator with rechargeable battery, RS485, and real-time clock. Loadcell Excitation: 5V DC ±5% 60 mA Internal Resolution: 2,000,000 counts maximum Display Resolution: 5,000 NTEP Operating Environment: 32° – 104°F / 0° – 40°C
SuspensionSuspension scales include the Digital Hanging scale and IN Series Spring scale. The digital hanging scale features all the same qualities as the other scales. While also having the simplicity and convenience and accuracy of a digital operation. The IN Series Spring scale features a heavy-gauge solid brass construction with precision steel springs. In addition the scale features avoirdupois and metric graduations that deeply embossed for easy reading.
WashdownWashdown scales feature stainless steel construction with IP66 rated waterproof protection. In addition they feature RS232 interface, various units of measurements and external calibration.
Ovens and FurnacesOvens and furnaces range from the large capacity oven, digital and analog ovens, the muffle furnaces and others. These units have quality features such as: ambient temperature range, airflow design, double-wall construction, and more.
ThermometersThermometers read temperatures, feature USB data logging, chart recording and more. Available thermometers range from different categories such as: data loggers, dial, digital, digital infrared, environmental quality control and mercury-spirit filled.
Glassware and PlasticwareGlassware plasticware features all of the equipment needed from cylinders to beakers. As well as stirring rods, tongs and more.
Pans and ContainersVarious pans and containers available for purchase. Ranging from galvanized pans, material handling pans, stainless steel and aluminum pans and much more. Other items available such as: clear poly sample bags, woven poly sample bags and sample cans.
ChemicalsVarious amounts of chemicals available for your testing equipment needs. Chemicals available range from carbonate, chloride, solution, hydraulic acid, sulfate and others. In addition, please call us if there is a specific chemical you need and cannot find.
Coating Thickness GaugesCoating thickness gauges features all of the PosiTector and PosiTest equipment you could need. The PosiTector uses magnetic and eddy current principles as a fully electronic coating thickness gauge. While the Smartlink wirelessly connects a Postitector probe to your Apple iOS or Android smartphone. In addition a PosiTest measures non-magnetic coatings on steel.
Environmental MetersEnvironmental meters all have different uses for measuring. For example: the digital radiation meter, indoor air quality meter, carbon monoxide meter and many others have different quality uses. The dissolved Oxygen meter and Aquashock water purity both come as kits providing all of the equipment needed.
Fire-ProofingFire-proofing equipment features the digital hanging scale, Epoxy foam, bond strength cap and the depth gauge. The bond strength cap with hook determines fire-proofing adhesion/bond strength. While a gauge measures the depth of fireproofing. The two part expoxy foam works best to create a closed cell keeping it sealed and safe from melting and the absorption of water.
Safety EquipmentAll of the safety equipment you could need to perform a test including gloves, lab coats, glasses and more. Safety gloves feature the 7 mil Nitrile powder-free gloves, Charguard heat resistant gloves and lab gloves. Also included: beaker tongs, crucible tongs, and a table brush. The table brush features 10 x 1.75″ horsehair bristles and a 11.5″ long brush.
TimersVarious timers available for purchase with different features and qualities. Featured timers available: stopwatch, digital timer, four channel timer, universal lab timer and more. In addition one of the timers features a thermo-probe. The Thermo-timer with probe has a combination thermometer and timer feature. The temperature alarm signals when a peak temperature has reached its set point. While also monitors temperatures without opening the oven door.
Balances
Data LoggersData loggers feature readings with the use of type K probes. The main use of data loggers measures temperatures in soils, ovens, cuvets, water baths, chemical solutions and extremely cold conditions. In addition the chart recording thermometer features a micro-controller design, programmable speeds and 12V operation. The 4 channel data logger also differs from the others with its unique portable design that has the ability to automatically record and store up to 16,000 data points.
DialDial face thermometers also feature the same design look with the round face and 5″ probe. However these thermometers differ in their ranges of temperatures, such as: 25°F – 125°F, 0°F – 220°F and 50°F – 550°F. In addition the dial thermometers feature accuracy of ±1% or ±2% .
DigitalDigital thermometers all feature a similar design with their wide LCD readout face and long probe. Most of the digital thermometers feature an auto-off system to prolong battery life. In addition they also feature the IP65 waterproof protection and measurements ranges of -40 to 450°F. The flip probe digital thermometer differs from the others as it has five adjustable probes, whereas the other thermometers only feature one. In addition, its temperature range is -40 to 482°F and has an accuracy of ±0.5°C.
Digital InfraredDigital infrared thermometers provide a wide measurement range, large backlit LCD display and automatic data storage. Each thermometers features different ratios of measurement ranges such as: 12:1, 6:1, 50:1, 30:1 and 11:1. Some digital infrared thermometers feature a type K probe or attachment spot to support different types of measurements needed. In addition the ToolSmart thermometer features Bluetooth capabilities. This thermometer uses Bluetooth technology on an app, creating an easier job for the user. With the app you can store data while taking measurements, share data to others, and use measurements to tag photos.
Environmental Quality ControlEnvironmental quality control thermometers all have different uses for measuring. For example: the digital radiation meter, indoor air quality meter, carbon monoxide meter and many others. The dissolved Oxygen meter and Aquashock water purity both come as kits providing all of the equipment needed.
Mercury and Spirit FilledMercury and spirit filled thermometers made for specific testing and calibrated to your specific requirements. With the mercury-spirit filled thermometers keep in mind many state local laws prohibit the sale or shipment of mercury. Check laws in your area or call us before purchasing.
Soil-FieldFor any application, Myers has the soil field testing equipment you need. Myers provides a wide range of quality soil field testing equipment that meet many industry standards. For compaction and density applications, we offer top of the line nuclear gauges, sand cones, and density drive samplers. We supply Instrotek, Troxler and CPN nuclear gauge, both new and used. We also have an extensive list of Shelby tube samplers. Shelby tubes extract a relatively undisturbed soil sample to determine density, permeability, compressibility, and strength. In addition, we offer the high-tech soil resistance meter in analog and digital readabilities to determine soil resistance values with ease.
AugersThe designed use of augers obtain disturbed soil samples. Augers have an open entry way that makes it easier for small soil clumps and small rocks to enter. Various types have different designs structures for material such as: Mud Augers, Regular Augers, Spiral type augers and Economy augers. In addition the basic soil sampling kits provide the ability to auger in materials up to 12 feet. The comes with all of the basic tools and comes in two different sizes, 2.25″ and 3.25″.
CBR Test SetA CBR test set includes all of the equipment you would need to perform a single test. CBR tests follow the U.S. Army Corps of Engineers and ASTM recommendations.
Color ChartsSoil color charts provide all colors of soils, making evaluations in the field quick and easy. The color chart comes in a three-hole ring binder and separators to determine the type of soil.
Compaction and DensityCompaction and density equipment ranges from density sand, density drive sampler, voluvessels and a density gauge. Voluvessels available feature different capacities of 1/20 cu. ft and 1/13 cu. ft. The electrical density gauge determines the moisture and density of compacted soils used in road beds and foundations. Also a designed use for a construction aid to monitor day to day compaction operations. An in-place density accessory kit includes items such as: 100 sample bags, pocket dial thermometer, steel chisel, rubber mallet and everything else needed for a test.
Guelph PermeameterGuelph permeameter quickly and accurately measures in-situ hydraulic conductivity. Measurements completed within 30 minutes to 2 hours depending on the soil type. The Guelph permeameter kit includes everything to perform a test, such as: filed tripod, well auger, cleanup tools and more.
Nuclear GaugesNuclear gauges provide the most accurate and easy to use moisture/density testing instrument available. An easy to read LCD screen displays results, and has quick and efficient software operation. In addition, other ideal items for nuclear gauging use features the Nuk-lok, Ranger survey meter and others. The smart MC update and SmartPanel upgrade help update your old gauge by a fraction of the price. Upgraded features include RS232 communication, backlight for night use, self-test features and more.
PenetrometersPenetrometers feature digital readouts making testing and recording readings easy. Penetrometers evaluate soil consistency by determining the soil’s level of compaction and/or the bearing capacity. Various types of penetrometers are available. In addition, the Proctor Penetrometer Set establishes the moisture penetration resistance relations of fine grained soils. The set includes eight interchangeable needles.
Probe RodsFiberglass and steel probe rods locate irrigation, power and water lines. The fiberglass probe rod has a shaft diameter of 1/2″ and a zinc tip with a 13.75″ handle bar. Steel probe rods also locate soft zones such as subgrades, and footing excavations. The steel rod has a shaft diameter of 1/2″ and a zinc tip with a 13.75″ tee bar handle.
Shelby TubesShelby tubes drive into the ground to extract a relatively undisturbed soil sample to determine density, permeability, compressibility and strength. Each tube has thin-walls, hollow steel samplers and one chamfered end to form a cutting edge. Other ideal items used with Shelby tubes include, plastic end caps, sealing wax, drive heads and expansion packers.
Soil ResistivitySoil resistivity kits determine the soil resistance values. The digital meter and analog meter both determine soil resistance values but with different features. The soil resistance meter features a large dial, with easy readability and eight ranges from 0.1 Ohms to 1.1 Mega-Ohms. As well as displays readings directly from the analog dial of the meter. While the digital meter displays readings instantly with a push of a button. Also provides readings to be logged directly to a user’s Bluetooth-enabled PC or PDA device. The digital meter ranges from 0.01 Ohms to 10 Mega-Ohms.
Vane ShearVane Shear equipment determines shear strength values of cohesive soils. The TORVANE shear measurement device rapidly determines shear strength in cohesive soils either in the lab or the field. The metal pocket vane shear equipment takes on-site measurements of excavations and readings of split core soil samples. In addition the vane inspection set provides a rapid check of the stability of foundations, excavations and trenches in clay.
Water InfiltrationWater infiltration features the Double Ring Infiltrometer. The infiltrometer features two stainless steel rings that have a double thick welded top edge for increased stability. The mariotte tubes provide a constant head of water for flow tests with 3,000 and 10,000 ml capacities.
Water Level IndicatorsWater level indicators determine water levels in drainage operations, dams, reservoirs, embankments, and wells. As well as bore holes, underground cavities or any hydrological/geological work.
Soil-LabSoil Lab Testing Equipment Myers offers soil lab testing equipment that meets many industry standards. There are soil compactors, hammer and molds for the compaction of soils. For performing liquid limit or Atterberg tests in accordance with ASTM specifications, we provide different types of liquid limit machines and accessories. In addition, we offer top of the line load frames for testing triaxial, permeability, CBR, consolidation, and direct shear. We also provide mold sets and vibrating tables to test for relative density of soils. If hydrometer testing equipment is what you are looking for, we have hydrometers, hydrometer jars, and the soil dispersion mixer. We also have sodium hexametaphospate and the jar bath.
Combination Soil TestingCombination soil testing outfits offer the finest visual color matching system available. Technically advanced reagent systems provide fast, simple and extremely accurate soil testing results. The standardized regents produce color reactions measured against laminated color charts. All outfits come in lightweight carrying cases with components securely mounted in removable foam trays.
Calcium CarbonateThe calcium carbonate content chamber test rapidly determines the calcium carbonate content of soils. A 10 psi Bourdon tube pressure gauge comes pre-calibrated with reagent grade calcium carbonate. The calcium carbonate features a sealed 2.5″ID x 5.5″H clear acrylic chamber assembly that anodizes aluminum end caps. In addition, the content chamber includes a pressure gauge, bleed valve and 20ml cup with handle.
CBR TestingThe California Bearing Ratio or CBR testing yields relative strength of laboratory compacted or in-situ soils and base coarse materials. The test penetrates resistance of a soil to a standard sized piston. CBR testing equipment includes load frames, filter paper, molds, spacer discs, surcharge weights and more. The manual CBR load frame uses a two-position mechanical jack to provide steady test speeds. As well as rapid travel of the platen for positioning of the sample. The Versa-Loader load frame performs compaction, CBR, unconfined compression, triaxial, and soil strength tests. The unit’s push button control operates up, down, and stop functions with ease, while a second knob adjusts speed. The multi-function load frame performs CBR, UC, UU and Marshall testing. The frame uses a 3/4 hp dc drive motor and controller. Its adjustable speed range maintains speed regulation withing 1%.
Load FramesLoad frames work with CBR, UCC, UU, soil cement and Marshall testing. Load frames feature RS232, high speed platen advances, and mechanical jacks to provide steady test speeds.
CBR Test ComponentsCBR test components features all of the equipment needed during a CBR test. Items such as: dial indicator, filter screen, surcharge weight, CBR spacer disc, CBR mold and more.
CompactionCompaction equipment compacts and rotates the mold after each blow. The automatic compactor easily compacts mold while keeping track of the number of hammer blows. While compaction hammers incorporate either 5.5 or 10lb weight with a guide sleeve and vent holes. Used in compaction testing proctor molds come in either 4″ or 6″ diameters.
Automatic CompactorsThe automatic compactor easily compacts and rotates the mold after each blow while keeping track of the number of hammer blows. The machine shuts off once a preset number of blows is reached. The start/stop function of the compactor is independent of the counter. The unit can be used to perform standard or modified compaction tests using a 5.5lb hammer with 12″ height of drop or a 10lb hammer with 18″ drop. Hammer lift compensates the height of the drop for soil thickness in the mold during compaction. The weight of the hammer is concentrated at the foot, allowing free fall of the hammer. The optional safety cage provides protection from moving parts during compaction. The unit is hinged to allow access to the mold and hammer.
Compaction HammersThe manual, moisture/density compaction hammers incorporate either a 5.5 or 10lb weight. They feature a guide sleeve with 4 vent holes at each end.
Proctor MoldsThe proctor molds or compaction molds work with compaction testing of soils in the lab. The modified and standard compaction molds come in either 4″ or 6″ diameters and have detachable collars. Made of cold-rolled steel tubing, plated for rust resistance. The split compaction molds also come in 4″ or 6″ diameters and have a vertical split in their body with 2 quick acting clamps for easy removal of specimen. Their clamps rotate 15 degrees off the base plate corners for easier installation on automatic mechanical compactors. The LBR compaction mold has a 6″ diameter and a volume of 1/13.33 ft³. Its collar extension and solid base plate clamps on either end of the cylinder. A beveled straight edge strikes off samples in containers, measures or molds.
ConsolidationConsolidation of soils provides information for calculating expected settlement for structures and pavements. The Conbel® Load Frame features a pneumatic, dead weight system. The system instantaneously applies and maintains pneumatic loads for precision consolidation testing. As well as features a dead weight mechanism for application of small loads from 100 to 3,200tsf. A dead weight frame has a construction of anodized aluminum for corrosion resistance. The unit has a capacity of 48tsf and comes equipped with a rear weight counterbalance beam assembly. Beam ratios range from 9:1, 10:1 or 11:1. Its design provides instantaneous loading with minimal impact. In addition, the bench top of the dead weight load frame stands free on the floor.
Direct ShearThe direct shear machines use pneumatic pressure for accurate application of sensitive confining loads. The direct shear test determines resistance to lateral shear forces applied to a soil specimen. The dead weight machine uses a 10:1 beam with loading device to confining pressures. A load cell with digital readout displays shear force and analog dial indicators measure vertical shear displacement. A stepper motor drive controls the strain rate within 1% and easily adjusts using a digital thumb wheel control. The large shear machine measures the total resistance to shear of large 12″ square soil samples. The machine uses the CONBEL® system for loading the samples. The soil specimens mount in a two piece shear ring assembly, divided in half horizontally. The bottom half holds securely in place and a vertical confining force is applied. In addition, horizontal force directs against the upper half of the ring to shear the specimen.
PlatformPlatform Scales The NTEP approved platform scales have a 4″ x 4″ alloy steel platform. The easy to read backlit display reads in lb or kg. The scales also feature a bi-directional RS 232 interface. The scale functions include net/gross, pre-tare, animal hold, accumulation. The scales also have an external power adapter and internal calibration. In addition, the scales have a capacity of 5,000 or 10,000 lbs and a readability of 1 lb. The scales have an optional Intell-Weigh™ 10 indicator with rechargeable battery, RS485, and real-time clock. Loadcell Excitation: 5V DC ±5% 60 mA Internal Resolution: 2,000,000 counts maximum Display Resolution: 5,000 NTEP Operating Environment: 32° – 104°F / 0° – 40°C
SuspensionSuspension scales include the Digital Hanging scale and IN Series Spring scale. The digital hanging scale features all the same qualities as the other scales. While also having the simplicity and convenience and accuracy of a digital operation. The IN Series Spring scale features a heavy-gauge solid brass construction with precision steel springs. In addition the scale features avoirdupois and metric graduations that deeply embossed for easy reading.
WashdownWashdown scales feature stainless steel construction with IP66 rated waterproof protection. In addition they feature RS232 interface, various units of measurements and external calibration.
BalancesBalances come in different weighting methods, such as: analytical, high precision, precision 0.01g and precision 0.1g. Each balance provides different qualities for your weighing needs.
Ovens and FurnacesOvens and furnaces range from the large capacity oven, digital and analog ovens, the muffle furnaces and others. These units have quality features such as: ambient temperature range, airflow design, double-wall construction, and more.
ThermometersThermometers read temperatures, feature USB data logging, chart recording and more. Available thermometers range from different categories such as: data loggers, dial, digital, digital infrared, environmental quality control and mercury-spirit filled.
Glassware and PlasticwareGlassware plasticware features all of the equipment needed from cylinders to beakers. As well as stirring rods, tongs and more.
Pans and ContainersVarious pans and containers available for purchase. Ranging from galvanized pans, material handling pans, stainless steel and aluminum pans and much more. Other items available such as: clear poly sample bags, woven poly sample bags and sample cans.
ChemicalsVarious amounts of chemicals available for your testing equipment needs. Chemicals available range from carbonate, chloride, solution, hydraulic acid, sulfate and others. In addition, please call us if there is a specific chemical you need and cannot find.
Coating Thickness GaugesCoating thickness gauges features all of the PosiTector and PosiTest equipment you could need. The PosiTector uses magnetic and eddy current principles as a fully electronic coating thickness gauge. While the Smartlink wirelessly connects a Postitector probe to your Apple iOS or Android smartphone. In addition a PosiTest measures non-magnetic coatings on steel.
Environmental MetersEnvironmental meters all have different uses for measuring. For example: the digital radiation meter, indoor air quality meter, carbon monoxide meter and many others have different quality uses. The dissolved Oxygen meter and Aquashock water purity both come as kits providing all of the equipment needed.
Fire-ProofingFire-proofing equipment features the digital hanging scale, Epoxy foam, bond strength cap and the depth gauge. The bond strength cap with hook determines fire-proofing adhesion/bond strength. While a gauge measures the depth of fireproofing. The two part expoxy foam works best to create a closed cell keeping it sealed and safe from melting and the absorption of water.
Safety EquipmentAll of the safety equipment you could need to perform a test including gloves, lab coats, glasses and more. Safety gloves feature the 7 mil Nitrile powder-free gloves, Charguard heat resistant gloves and lab gloves. Also included: beaker tongs, crucible tongs, and a table brush. The table brush features 10 x 1.75″ horsehair bristles and a 11.5″ long brush.
TimersVarious timers available for purchase with different features and qualities. Featured timers available: stopwatch, digital timer, four channel timer, universal lab timer and more. In addition one of the timers features a thermo-probe. The Thermo-timer with probe has a combination thermometer and timer feature. The temperature alarm signals when a peak temperature has reached its set point. While also monitors temperatures without opening the oven door.
Analytical 0.0001gAnalytical 0.0001g balances include Prime HT series, HR-AZ/HR-A series, Adventurer, the Nimbus and the XB series. Each balance comes with quality features such as: CalQuick single button calibration, large weighing chambers, RS232 interface and much more.
High Precision 0.001gHigh precision 0.001g balances include Pioneer, GX Series, GF Series, PM Series and the PMW series. Each balance comes with quality features such as: three filter modes, underhook capability, calibration weight and much more.
Precision 0.01gPrecision 0.01g balances include GF Series, PX Series, iBalance i3100, Nimbus, AJ series and the PBW series. Each balance comes with quality features such as: auto tare, external calibration, below balance weighing and much more.
Precision 0.1gPrecision 0.1g balances include Explorer, Nimbus, GP series, the triple beam balance and more. Each balance comes with quality features such as: below balance weighing, filtering levels, adjustable zero tracking and much more. The triple beam balance however differs from the other balances has it has 3 beams, magnetic damping and pre-calibrated weights.
Data LoggersData loggers feature readings with the use of type K probes. The main use of data loggers measures temperatures in soils, ovens, cuvets, water baths, chemical solutions and extremely cold conditions. In addition the chart recording thermometer features a micro-controller design, programmable speeds and 12V operation. The 4 channel data logger also differs from the others with its unique portable design that has the ability to automatically record and store up to 16,000 data points.
DialDial face thermometers also feature the same design look with the round face and 5″ probe. However these thermometers differ in their ranges of temperatures, such as: 25°F – 125°F, 0°F – 220°F and 50°F – 550°F. In addition the dial thermometers feature accuracy of ±1% or ±2% .
DigitalDigital thermometers all feature a similar design with their wide LCD readout face and long probe. Most of the digital thermometers feature an auto-off system to prolong battery life. In addition they also feature the IP65 waterproof protection and measurements ranges of -40 to 450°F. The flip probe digital thermometer differs from the others as it has five adjustable probes, whereas the other thermometers only feature one. In addition, its temperature range is -40 to 482°F and has an accuracy of ±0.5°C.
Digital InfraredDigital infrared thermometers provide a wide measurement range, large backlit LCD display and automatic data storage. Each thermometers features different ratios of measurement ranges such as: 12:1, 6:1, 50:1, 30:1 and 11:1. Some digital infrared thermometers feature a type K probe or attachment spot to support different types of measurements needed. In addition the ToolSmart thermometer features Bluetooth capabilities. This thermometer uses Bluetooth technology on an app, creating an easier job for the user. With the app you can store data while taking measurements, share data to others, and use measurements to tag photos.
Environmental Quality ControlEnvironmental quality control thermometers all have different uses for measuring. For example: the digital radiation meter, indoor air quality meter, carbon monoxide meter and many others. The dissolved Oxygen meter and Aquashock water purity both come as kits providing all of the equipment needed.
Mercury and Spirit FilledMercury and spirit filled thermometers made for specific testing and calibrated to your specific requirements. With the mercury-spirit filled thermometers keep in mind many state local laws prohibit the sale or shipment of mercury. Check laws in your area or call us before purchasing.
Hydrometer TestingHydrometer testing determines complete particle size distribution in soils and for dispersing soil suspensions. The heavy-duty unit operates at a speed above 10,000 RPM. The soil hydrometer jar measures suspended solids in sedimentation cylinders over time periods of 24 hours. Soil specimens mix in a solution of water and sodium hexametaphosphate. The hydrometer bath provides a 68°F ambient temperature throughout the unit. Using a microprocessor-based temperature control with integral heater and chiller. In addition, the bath comes fully insulated and has a capacity of 8 hydrometer jars.
Liquid LimitThe liquid limit set performs Atterberg or liquid limit tests in accordance with ASTM specifications. It determines the water content at which soil changes from a liquid to a plastic state. A soil sample placed into a cup in the machine separates into two halves using a grooving tool. The crank on the machine rotates so that the cup holding the sample strikes the base of the test machines. Machines are available with counters and motors if preferred. The soil grinder quickly prepares dry soils samples for limit tests, particle size analysis and other standard lab tests. It preserves true grain size for accurate and repeatable test results. The resiliency tester measures resiliency of the hard rubber base of the liquid limit machines. Complete tests within a 90 day interval to ensure the base meets ASTM D4318 standards.
Plastic-Shrinkage LimitPlastic-shrinkage limit testing equipment for all plastic and shrinkage water content needs. Plastic limit measures water content when a soil can no longer be rolled into 1/8″ diameter threads without crumbling. Plastic limit subtracts from liquid limit to establish the plasticity index. The plastic limit test includes all components to perform the plastic limit test in accordance with ASTM and AASHTO standards. Shrinkage limit measures water content where further loss of moisture does not cause a decrease in volume of a specimen. Samples for shrinkage limit tests usually take from a larger sample prepared for liquid and plastic limit tests.
Relative DensityRelative density testing works best when granular soils do not respond well to Proctor moisture-density tests. Determine maximum density by placing soil sample in molds and densifying using a vibrating table and surcharge. Determine minimum index density by loose placement in the molds using pouring funnels, scoop, or shovel, of soil particles. The vibrating table has a cushioned steel 30″ x 30″ deck. It activates by an electromagnetic vibrator with over a 100lb actuator. The solid state circuitry allows precise amplitude control even with fluctuating voltage supplies. The relative density molds are constant volume change cylinders that regulate sample size in determining relative density of cohesionless soils. The gauge set fits guide brackets of either mold set to measure distance. Measuring from the top of the mold to the top of the base plate after densification.
Sample EjectorsSample ejectors quickly extrude compacted soil or asphalt samples from soil density or Marshall compaction molds. The sample ejector works for both lab and field use to extract soil samples from 4″ and 6″ compaction molds. The ejection force generates by means of a 3-ton capacity, hand operated hydraulic jack. The cast-aluminum ejector head assembly positions at different heights through the use of quick release pins. This helps the operator to easily match the ejection travel to the height of the mold being used. In addition, adapter ring accessories provide soil samples from 2″, 2.5″, and 3″ diameter Shelby tubes to be extruded.
Sand EquivalentThe sand equivalent test indicates the relative proportions of clay-like fines in granular soils and aggregates. The manual shaker works best for use on the job site to give more uniform shaking action. Uniform shaking action pushes the top frame by a simple stroke of the hand. The portable unit features a removable wooden case. As well as two separate electronic timers to increase accuracy and ease of operation compared to a spring-type timer. The consistent, repeatable oscillation of the apparatus eliminates operator-cause variation. Sand equivalent stock solution works with distilled water in the ratio of 85ml solution per gallon of water. Made from anhydrous calcium chloride, glycerine, and formaldehyde.
Triaxial/PermeabilityTriaxial/Permeability soil testing equipment provides information about shear resistance and strength. As well as cohesion to predict slope stability and structural foundation behavior.
Dispersion ApparatusDesigned for the Pinhole Test, the Pinhole Dispersion Apparatus identifies the dispersive characteristics of soil. As well as, helps determine the stability of clay soils used.
De-Airing TanksDe-airing tanks produce batches of de-aired water without the use of heat. Designed to remove dissolved gasses from ordinary tap water. In addition the de-airing system can de-air water to less than 0.5 pph dissolved oxygen in 4 minutes.
Control PanelsControl panels feature longer burettes and 0.02ml graduation that give more accurate results and faster turnaround time. The flex panels feature single cell, double cell and master control panels. These panels include a digital readout pressure meter, pressure supply gauge. As well as a master pressure regulator. The add-on logic panel provide additional triaxial and permeability test chambers. This helps to increase the economical productivity. In addition, these panels attach to the Master Logic Control panel. By using the master’s digital pressure readout they display the confining cell pressures. The design of the master logic control panel combines precise control, logic layout and quality components for accuracy.
Load CellsLoad cells measure in either compression or tension to an accuracy of less than 0.0300% strain. Constructed out of stainless or nickel alloy plated steel.
Load FramesLoad frames work with CBR, UCC, UU, soil cement and Marshall testing. Load frames feature RS232, high speed platen advances, and mechanical jacks to provide steady test speeds.
Load RingsLoad rings measure compression with their high strength aluminum alloy. As well as their repeatable elastic deformation ability under varying loads.
PermeametersPermeameters test granular samples using either the constant-head or falling-head methods. Constant and falling head use the permeameter, manometer tube, two funnels and either porous stones or perforated screens. Other permeameters like the Shelby tube test undisturbed soil samples in sections of 3 in diameter Shelby tubes. Consisting of corrosion-resistant top and bottom plates, valves and two porous stones. Another permeameter such as the Compaction permeameter determines the permeability of clay, sand and gravel. Molds come with upper and lower plates that feature inlet/outlet connectors for water to flow through.
Test ChambersTriaxial test chambers feature a precision ground and polished stainless steel load piston designed for low breakaway friction. In addition, they also work as flexible wall permeability testing applications.
Testing AccessoriesAll of the testing accessories you could need for a triaxial or permeability test. Accessories available range from, open end wire saw, latex membranes, o-rings, and high vacuum grease. In addition other accessories include 2 part compaction molds, 2 part miter boxes and vacuum split molds.

Your cart is currently empty!

Construction Materials Testing Equipment

Construction Materials Testing Equipment

Construction Materials Testing Equipment

About

Team
History
Careers

Privacy

Privacy Policy
Terms and Conditions
Contact Us

Social

Facebook
Instagram
Twitter/X

Designed with WordPress

9

Item added to cart

9

Your Cart

SCC J-Ring Test Set

32+ shoppers have bought this

SCC J-Ring Test Set

Price: $485.00

- +

$485.00

Plastic Site Tube

29+ shoppers have bought this

Plastic Sight Tube

Price: $20.90

- +

$20.90

28+ shoppers have bought this

Slant Shear Dummy Sections

Price: $120.00

- +

$120.00

Roller Meter Funnel

8+ shoppers have bought this

Funnel

Price: $36.00

- +

$36.00

Needle Valve Stem

71+ shoppers have bought this

Needle Valve Stem (ACM STYLE)

Price: $25.25

- +

$25.25

Needle Valve Lever

236+ shoppers have bought this

Needle Valve Lever

Price: $7.75

- +

$7.75

Bleeder Valve Cap with Gasket

316+ shoppers have bought this

Bleeder Cap with Gasket

Price: $3.00

- +

$3.00

cleaning plunger

Cleaning Plunger

Price: $160.00

- +

$160.00

1 Pint Measuring Cup

20+ shoppers have bought this

1 Pint Measuring Cup

Price: $3.50

- +

$3.50

Empty Cart

Have a Promo Code?

Subtotal $861.40

Total $861.40

Continue Shopping View Cart Checkout

Aluminum Base

$170.00 +Add
Aluminum Roller Meter Carrying Case

$99.75 +Add
Roller Meter Lid O-Ring

$4.80 +Add
Tube Gasket - Bottom

$1.90 +Add
Clear Calibrated Tube Assembly

$38.00 +Add

Apply Coupon